A “how to” obligatory report

After a few hours of chilling and tinkering, our mad crack team successfully breakdown the so called “Instructions” to sort of build your very own Kaleidoscopic Laser Irradiation System.

This is what you might need:

- A Laser (30 mW or less.. or more)
- 1 motor 1.5-3 Volts
- 5 mirror circles 1 cm diameter
- 1 defraction grading film
- a battery holder 2 AA batteries
- A DPDT switch
- Wire
- Glue Gun with Hot Glue.

- TV

Basic Procedure:

Motor shaft is coupled to the mirror array covered with a defraction grating. The motor is then connected to a 3V source through a switch for control. The laser is mounted pointing at the rotating array reflecting towards the object.

The projection created will sucessfull irradiate any type of waste.

*Remember that you must built the system upon a TV to harness the X-Ray Power needed.